Corrugated Carton Clapboard 3 5 7 Layers Production Line
Hydraulic shaftless mill roll stand:
★ adopt hydraulic drive to complete the paper clamping, loosen,
remove for the medium, translation left and right and others,the
lifting of the paper adopts hydraulic drive.
★brake adjustable adopts multipoint braking system.
★ every stand matched two sets paper car , and they can paper on
the both sides at the same time.
Paper trolley, track:
★ the whole track buried,The main frame of the 14th Channel steel
with ¢ 20mm cold drawn welded round,length of track 6000mm.
★ each paper holder matched two sets paper trolley, and paper on
both sides at the same time.pull the roller paper to the right
place.
Top(core)paper preheater:
★ In accordance with national standard category pressure vessel,and
with the pressure vessel certificate.
★ The roll surface after precision grinding, fine grinding and hard
chromium plating processing,surface friction,durable.
★ electric adjustable angle, angle can rotate in the range of
360°,and adjust the paper preheat area
Single surface adsorption machine:
★ The use of suction hood structure, with high - pressure strong
fan. The air suction is equipped with sound attenuation device, and
the air source and electrical control are concentrated in the same
operating cabinet. The distance from the main machine is not less
than 1.5m.
★ The operating side is fully closed and covered.Machine base and
wallboard cast iron structure, wallboard thickness of 130mm.
Universal joint drive.
★ The corrugated roller material is made of 48 crmo alloy steel,
after tempering, medium frequency quenching, surface polishing,
corrugated roller diameter ¢293 mm, surface hardness above HRC60
degrees (optional, tungsten carbide roll and surface hardness
HV1200). Key parts of the tile roller, pressure roller bearings
using wafangdian high temperature bearings.
★ The pressure roller ¢320 mm, surface grinding and chrome plated
treatment; The cylinder is controlled to move up and down, and the
material is medium carbon steel no.45, tempering and tempering
treatment (with buffer device).
★ The pneumatic control to glue back glue, glue spreader with 25
￠215 mm diameter surface after polishing line after pit type
checker processing hard chromium plating processing, scraping the
rubber roller surface after grinding hard chromium plating
processing.
★ Raw materials of corrugated roller and pressure roller are
provided by zhongyuan special steel co., LTD. The corrugated roller
has a top middle height of 0.15mm on one side and a middle height
of 0.075mm on the other side. Add limit device.
